Single Wide Stave Oak Worktops
The Oak ‘Single Wide Stave’ is one of our most beautiful worktops. Made from furniture grade North American White Oak and constructed to perfection, they add the most incredible finishing touch to a kitchen. Each worktop has a varied stave width, but there are no joins within the planks. This means that every piece of wood used in this worktop has to be flawless - and the results are absolutely stunning.
A typical Oak Worktop like this usually has six or seven staves of random width, varying between two and five inches.
We can cut sink holes, drainage grooves, prepare butt joins - in fact we can get everything ready so all your fitters have to do is give it a final sand, oil it and then install it. If you or they are short of time, we can even do all the final sanding and oiling as well.
It is very hard for us to make Oak worktops like this longer than 3 metres - it can be done but they are very rare as it is so difficult finding long clear lumber, even in FAS grade.
Sadly the Wide Single Stave Oak is one of the real cases where the photographs simply do not do the worktop justice, sorry.
Whilst we can bespoke cut almost any size of worktop, please find below as a guide our prices for our standard sized Single Wide Stave Oak Worktops;
2000 mm x 636 mm £ 485
3000 mm x 636 mm £ 697
4000 mm x 636 mm £ 1242
5000 mm x 636 mm £ 1895
6000 mm x 636 mm £ 3256
2000 mm x 1000 mm £ 924
(All prices include VAT, our worktops are 45 mm thick as standard)
We are able to make your worktops to almost any length or width. Please feel free to call the office with your specific sizes and we will be able to provide you with an exact price.
|
A beautiful example of a
Single Wide Stave Oak Worktop
Exactly the same worktop,
but in a different light
Again in a different light
| 
